BMA Info 53/2015

interaktive_karte_bmainfo_en

A successful year for BMA America

New projects and new colleagues in Colorado.

Breaking new ground in Central America

Last year, a total of four top sugar producers in Central America decided to upgrade their plants. They opted for BMA products – breaking new ground for sugar factories in the region.

Installation and commissioning of a pan seeding system

In the beet sugar industry, pan seeding systems have been established for a long time. BMA has now successfully applied the process in the cane sugar industry.

Manufacturing and service – BMA Brazil expands its capacities

In 2012, BMA set up its subsidiary BMA Brasil Equipamentos Industriais Ltda. – who has since gone from strength to strength. A new production and service centre opened in Indaiatuba in early September 2014.

Interview

BMA Info talks to Igor Djoukwé

A force, to be reckoned with

BMA MENA Industries are going from strength to strength as a design and service provider in the Middle East and North Africa.

Agrosnabsakhar – How a project turned into a big surprise

On first contact with the Agrosnabsakhar sugar factory, nobody at BMA could have foreseen how this collaboration would grow.

Russian pioneers – VKT for a competitive edge

The Russian sugar industry is driving the extension and upgrade of its production sites and BMA plays a key role in this development. The result: a significant increase in output.

Four companies, three continents, two years, one goal

Together with Etihad Food Industries, the BMA Group has got a large-scale project off the ground – collaboration at its best.

Innovations for better performance – A new drying and cooling plant

A good cooling and drying system is the key to high sugar quality. Reason enough for BMA to continuously enhance this equipment, launching new and innovative products on the market.

A premiere in Pakistan – Successful commissioning of two falling-film evaporators

Reducing consumption of resources to a minimum while enhancing performance – those were the objectives for a factory in Pakistan specified in the order JDW Sugar Mills Ltd. placed with BMA.

Indian Cane Power Ltd.– More revenue thanks to co-generation

Indian Cane Power Ltd. (ICPL) relies on bagasse for power generation. For several years now, BMA has helped the company implement its innovative concepts with numerous supplies of equipment.

Uzbekistan‘s most cutting-edge factory

The Angren Shakar refinery was commissioned in August 2014.

Expanding centrifugal production for China

In 2014, BMA China expanded its assembly range to include not only continuous centrifugals but also batch-type machines (see also BMA Info 52/2014). The model in question belongs to the well-established and reliable B series.

Centrifugals from BMA: Made in Germany

2014 was a truly international year, also for BMA‘s product business: customers on all continents opted for BMA centrifugals.

BMA Automation: a complex factory acceptance test

With the supply of the process control system including all key electrical equipment, BMA Automation was involved in the design of the new refinery in Iraq right from the start. The complex factory acceptance test was a major milestone on the path to the finished plant.

Scientific exchange across the globe – BMA at international conferences

BMA has been presenting the latest developments from current international sugar industry projects at conferences across the globe. The report on the upgrade and capacity extension of the ICPL cane sugar factory is a recent outstanding example.

Engineering projects for the cane and beet sugar industries

In the beet sugar industry, pan seeding systems have been established for a long time. BMA has now successfully applied the process in the cane sugar sector.

Overview of all articles

04.05.2009

Black box for cycle-synchronous logging of PLC data

Many companies decide to optimise their processes primarily because they want to enhance the availability of their plants. In particular for very complex plants, this requires exact data logging over extended periods, and archiving of process data, signals and the operating status of machinery and production equipment in synchronism with the cycles of the programmable logic controller (PLC). These data can also be used for troubleshooting and documenting operating characteristics.

Programmable logic controllers (PLCs) are generally not designed for archiving large sets of data also for long periods of time. The fault memory of the PLC, for instance, stores the date, time and type of an error, but not the operating status of the complete plant or machine at that time.

The black box of BMA Automation is an external storage medium that guarantees absolutely reliable and uninterrupted signal logging for many years. In various applications, the BMA Automation black box has proved to be a successful data logging and archiving tool in plants such as extraction plants in the sugar industry.

Stored data can also serve as unimpeachable evidence when trying to establish the cause of a defect. Since third parties have no access to the logged data, the data are protected against tampering. The black box is basically an industrial PC, which, because of its small size, can easily be accommodated inside a switchgear cubicle alongside the process PLC. MPI, Profibus or Industrial Ethernet (TCP/IP) are available for communication between the black box and the PLC. The black box is an autonomous unit. All it needs is a power supply and a connection to the PLC.

An uninterruptible power supply (UPS) protects it against power failure. The box is supplied with special software to ensure that the logged data are available even while the system is still in logging mode.

Benefits

  • Cycle-synchronous logging and long-term archiving of PLC data
    Data protected against tampering
  • Autonomous operation without any additional peripheral equipment
    Small size
  • Data logging for periods of more than three years
  • Existing systems can easily be retrofitted